Josh Engineers

Universal Production Programmer XELTEK make Warranty ONE year. All sockets are available at extra cost. 

GENERAL

1. BeeHive304 is next member of Elnec concurrent universal multiprogrammer series, built to meet the strong demand for an extremely fast and reliable multiprogrammer for high-capacity memories.
2. Designed with great emphasis on technical perfection and speed of hardware, this programmer perfectly fits for high-demanding desktop programming as well as for automated programming systems and ATE machines, where ensures the highest quality and overall yield.
3. BeeHive304 consists of four independent isolated universal programming sitess, based on the BeeProg3 programming core hardware. Therefore the programming sites can run asynchronously (concurrent multiprogramming programming mode). Each programming site starts programming at the moment the chip is detected to be inserted in the socket properly - independently on the status of other programming sites. As a result, three programming sites works, while you are replacing the programmed chip at the fourth site.
4. The BeeHive304 multiprogrammer supports as many chips, as the BeeProg3 programmer and without obvious decrease of programming speed because each programming site works independently. Also each programming site can program a different chip, if necessary.
5. Because the BeeProg3 programming core is based on a state of the art FPGA, powerful ARM processor and internal SSD, BeeHive304 is ready to program devices at theoretically possible speeds. The achieved ultra fast programming speed - more than 31 MB/s sustainable - is actually higher, than can be utilized for most of real devices. This is reflected in extremely short programming times. For example, the 8 GB eMMC NAND Flash could be done in less than 250 sec - if programmed memory allow that speed.
6. Tests show, that the BeeHive304 is currently faster than all competitors in this price category (status: 10/2015), and for many chips is the fastest at all.
7. BeeHive304 supports all kinds of types and silicon technologies of today's and tomorrow's programmable devices. It partially supports also devices "from yesterday". You can be sure the next devices support will require the software update only, at the most (if necessary) simple programming module, therefore the costs of ownership is minimized.
8. For the proper and reliable programming of ultra-fast memories the BeeHive304 utilizes specialized modules, optimally designed for specific device families, exactly according to the needs of programmed devices. But if it is possible, then universal programming modules, dedicated for IC package type, are used. The programming modules are identical for all programmers based on the BeeProg3 programming core.
9. Programming modules construction is designed for perfect stability at the top of the programmer, to be tough enough for insert/replace chips by mechanical arm and also allows to keep identical position of ZIF socket also after replacing of the module.
10. Modular construction of hardware - the programming sites works independently - allows for continuous operation when a part of the programming sites becomes inoperable. It also makes service quick and easy.
11. The sensing circuits detect proper placement of device in the socket of programming module, which allows to begin programming immediately upon insertion of a chip. The operator merely removes the finished chip and inserts a new chip. Operator training is therefore minimized.
12. BeeHive304 interfaces with any IBM PC compatible personal computers, running MS Windows OS, through USB (2.0 HigSpeed) port or LAN port (up to 1 Gb).
13. Banana jack for ESD wrist straps connection to easy-to-implement the ESD protection control.
14. With its very competitive price together with excellent hardware design for reliable programming, it is probably the best "value for money" programmer in this class.

 

 

Superpro 7504N Universal Programmer

Features: Mass production programmer for high production capacity, high versatility and high yield Built in 4 Superpro/7500 programmer modules representing the industry'speak level, up to 16 chips can be programmed at the same time. Supports almost every device you can see with extraordinary programming speed, including eMMC, NAND FLASH, SPI FLASH, NOR FLASH, MCU, CLPD, etc. If you are an industry leader, you need a programmer with high throughput, high programming yield and quality, a wide range of supported devices, and the ability to quickly upgrade to support future new devices. Characteristics o Built-in 4 asynchronous high-speed programmer modules representing the industry's peak level. SuperPro / 7504. Supporting up to 16 chips for simultaneous programming is the best choice for manufacturers with high productivity, high versatility and high quality. o Supports almost any device, including EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA, PROM, FLASH (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc. Support device voltage as low as 1.2V. Support device packages including but not limited to DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON , EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN, etc. o Programming eMMC, NAND FLASH, SPI FLASH and other devices are faster. o Optional adapter pressurization booster, it is more labor-saving to pick and place the chip. o Support all kinds of popular NAND FLASH Platforms and can be customized. o The tenth generation of pin drive technology ensures a cleaner signal, a wider voltage range and a higher signal bandwidth. With the strict compliance with the chip manufacturer's specifications, the algorithm software that accurately implements the timing specified by the IC manufacturer ensures a very high programming yield. o Comprehensive security mechanisms to protect chips and programmers. Features include hardware self-test, voltage autocalibration, chip mis-insertion detection, overcurrent detection, overvoltage protection, etc. o USB2.0 Communication interface. o Powerful and rich software features:  Project file The operator only needs to load the project file to start programming.  Password managementProject files and production control can be password protected.  Complete run log files and statistics Production quality tracking.  Support Win7/ Win 8/ Win 10

125000  supported devices from 344 manufacturers

EIGHT independent universal programming sites (BeeProg2 based) in one unit

extremely fast programming, one of the fastest programmers in this category

powerful independent pin driver circuit for each and every pin of the programmer

in-circuit programming capability through ISP connector

Windows from Windows XP to Windows 10 (32-bit and 64-bit)

unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand softwarewarranty - 3 years

approved by CE laboratory to meet CE requirements

DIP, SDIP, PLCC, JLCC, SOIC, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP supported with Adapters at extra cost

Programs 2 GB eMMC NAND Flash in less than 365 sec.

we procured our products from a vendor base which is working for several years and has made a name of ourselves in the market.

Universal 4 socket Gang programmer Warranty 3 years supports 120000 ICs

Meet the NEW STANDARD in the universal programming industry. The ultra powerful system engine allows to program either single or 4 chips simultaneously with equal ease. Convert the universal programmer into a 4 gang programmer just by inserting a 4-socket adapter. No need to buy an expensive gang programmer anymore and save thousands.

Advantages of SuperPro 7500

• Ultra Fast Programming Speed SuperPro 7500 programmers employ a very high speed MCU chip producing not only reliable programming algorithms, but also increasing programming speed. Utilization of ARM11 32bit MCU combined with an internal Linux operating system makes them the most advanced and versatile programmers in the industry. Superpro 7500 offers 30% higher programming speed and 8-10 times faster programming speed for eMMC devices as compared to Superpro 6100.
• Customized 4 Gang Adapters SuperPro 7500 can be used to program up to 4 chips at a time. Many EEPROM / Flash / MCU / eMMC chips are also supported in 2-Gang or 4-Gang mode to increase throughput by nearly four times!
• LAN Mode Most production programming applications need the programmer to be operated remotely. On SuperPro 7500, remote controlling can be achieved using the LAN port. Using the LAN port, programmers can be connected to a local network and can be remotely controlled via any computer on the network. In this case, the PC which controls the SuperPro 7500 acts as a server and SuperPro 7500 acts as a client.
• Project Files The project file stores preparations before programming. Users could also restore and save work environment. The project file includes device type, buffer data, operation option settings, configuration bit settings and batch commands. Project files may be password protected to increase security and reliability when operated by untrained operators.
• Auto Function The Auto function organizes different functions into a sequential group (erase, blank check, program, verify and protect). Functions are executed in sequential order similar to a batch command.
• Production Mode Once a chip is inserted correctly, the programmer automatically starts batch command of erase, blank check, program and verify. Auto chip detection saves time and increases efficiency.
• Production Statistics A log file could be used to save operation information before exiting the program. Log files can also be used to facilitate quality tracking.
• Auto Recognition of File Types We support almost all kinds of known file formats including file formats with automatic recognition functions: Binary, Intel (linear & segmented) Hex, Motorola S, Tektronix (linear & segmented), JEDEC, POF, etc.
• Auto Increment of Serial Numbers Auto-generation of electronic serial numbers is available on Superpro 7500. This feature is implemented by setting Auto Increment in Operation Option. Auto Increment allows users to add unique serial number into the device. After each successful programming, the software automatically changes the value by the specified increment mode.
• Intellectual Property Protection Password settings available in both PC and stand-alone mode.

Features:

• 125000 supported devices from 344 manufacturers
• four independent universal programming sites (BeeProg2 based) in one unit
• extremely fast programming, one of the fastest programmers in this category
• powerful independent pin driver circuit for each and every pin of the programmer
• in-circuit programming capability through ISP connector
• Windows from Windows XP to Windows 10 (32-bit and 64-bit)
• unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand softwarewarranty - 3 years
• approved by CE laboratory to meet CE requirements
• DIP, SDIP, PLCC, JLCC, SOIC, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP supported with Adapters at extra cost
• Programs 2 GB eMMC NAND Flash in less than 365 sec.

Universal programmer XELTEK make We are Distributors for XELTEK.